Description
MITEE-BITE Machinable Uniforce Clamps are compact and economical, allowing you to increase fixturing density on your machine table. Extra material on the clamping jaws allow you to machine them, using the included clamping plate, to suit the profile of your component. The specially designed steel wedge uniformly expands both side of the 7075-T6 aluminium channel. Fixturing unusual shaped parts in a high density format is now a complete breeze.
- Increases production capacity.
- Minimizes tool changes.
- Holds two parts with symmetrical clamping action.
- Ideal for clamping round or irregular shaped work pieces.
- Reduces wasted space.
- Easily mated to hydraulic pull cylinders.
- Ideal for pallet changers.
- Shown with Mitee-Bite Locating Rails.
Available in 5 sizes, the machinable uniforce clamps come with a unique locking plate. Use this plate to properly expand the aluminium channel for rigid machining of your custom profile while building you fixture plate.
Mitee-Bite machinable uniforce clamps will allow more parts per load, at an overall lower price than vise soft jaws.
Model # | A* | B | C | D | E | F† | G+ | H** | I | Holding Force (N.) |
| 500 | 28.6 | 12.7 | 15.7 | 10.67 | 6.3 | 4.6 | 10.16 | M2 | M4 | 2225 |
| 750 | 38.1 | 19.1 | 23.9 | 16.05 | 9.4 | 6.6 | 15.87 | M4 | M6 | 6675 |
| 1000 | 50.8 | 25.4 | 31.8 | 20.83 | 12.7 | 9.9 | 20.62 | M4 | M8 | 8900 |
| 1500 | 76.2 | 38.1 | 47.5 | 30.86 | 19.1 | 15.7 | 30.48 | M5 | M12 | 15575 |
| 2000 | 101.6 | 50.8 | 63.5 | 41.28 | 25.4 | 20.3 | 41.28 | M6 | M16 | 26700 |
A* The distance needed between workpieces for clamp clearance, drill and tap mounting holes at center of “A” dimension.
F† The amount of machinable stock on jaws.
H** Mounting Screws included.
